?在VMware里克隆出来的CentOS Linux。。
? The cloned VMware Linux.
ifconfig...没有看到eth0.。然后重启网卡又报下面错误。
Ifconfig... no eth0. Then reboot the card and report the following error.
故障现象:
Faults #xff1a;
service network restart
Shutting down loopback insterface:? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?[? OK? ]
Bringing up loopback insterface:? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? [? OK? ]
Bringing up interface eth0:? Device eth0 does not seem to be present,delaying initialization.? ? ? ? ? ? ? ? ? ? [FAILED]
解决办法:
Solutions #xff1a;
首先,打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示:
First xff0c; opening/etc/udev/rules.d/70-persistent-net.rules as follows: xff1a;
# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:1
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
记录下,eth1网卡的mac地址00:0c:29:50:bd:17
Record #xff0c; eth1 net card mac address 00:0c:29:50:bd:17
接下来,打开/etc/sysconfig/network-scripts/ifcfg-eth0
Next #xff0c; open/etc/sysconfig/network-scripts/ifcfg-eth0
# vi /etc/sysconfig/network-scripts/ifcfg-eth0
将 DEVICE="eth0"? 改成? DEVICE="eth1"? ,
将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址? HWADDR="00:0c:29:50:bd:17"
For DEVICE61; 34; eth034; 34; 34; 3; 34;
replace HWADR& #61; 34; 00:0c:29:8f:89:97#34; replace with mac?HWADR= 34; 00:0c:29:50:bd:17#34;
最后,重启网络
Last & #xff0c; reboot network
# service network restart
或者
# Service network restart #br/ # or
# /etc/init.d/network restart
正常了。
Normal.
注册有任何问题请添加 微信:MVIP619 拉你进入群
打开微信扫一扫
添加客服
进入交流群
发表评论