1、比特币是一个大账本。账本需要有人记账，记账的回报就是比特币。而这个记账权需要大家去抢。挖矿就是抢记账权。谁的计算能力大，谁就更有可能抢对这个记账。
One, bitcoin, is a big book. The book needs to be accounted for. The account book returns bitcoin. And this is a right to be taken. Mining is a right to be taken.
2、准备好矿机和电源，还需要网线和电脑。
2. The preparation of mine machines and power sources also requires a network and a computer.
3、查找IP软件(如果已经下载，跳过这一步)
3. Find IP software (exceeding this step if downloaded)
4、每台矿机都有自己的IP，需要安装软件才能识别。你可以在比特大陆官网-技术支持-设备支持找到这个软件。该软件名为IPReporter。
4 Each mine has its own IP, and you need to install a software to identify it. You can find it on the Bit Continental Officer Network - Technical Support - Equipment Support. The software is called IPReporter.
5、准备您自己的矿池和矿工编号(如果已注册，请跳过这一步)
5. Prepare your own pond and miner's number (exceed this step if registered)
6、如果你没有自己的矿池号和矿工号，你就不能保证你挖的比特币都到你自己的账户，所以准备这些很有必要。在蚂蚁矿池官网注册自己的矿池账号，创建矿工号。
If you don't have your own pond number and miner number, you can't guarantee that all the bitcoins you dig are in your own account, so it's necessary to prepare them. Register your pond account number on the ant pond network and create the miner number.
7、矿用连接网线
7. Mining connections
8、首先连接好网线，插到矿机的网线接口上。记得插紧。只有联网的矿机才能挖矿，宽带没有限制。
8- First, connect the net to the network interface of the miner. Remember to stick it tight. Only a networked miner can dig. Broadband is unlimited.
9、与地雷连接的电力线
9. Mine-linked power lines
10、将矿机电源的各个接口连接到矿机上。电源有10根线，分别连接到功率计算板和控制板。把电源线接口都接好，接完线记得检查有没有插的不够深的地方。所有电线接好后，就可以接通电源了。这时矿机的灯会开始亮，机器会开始响。
10, connect the various interfaces of the mine power source to the mine. The power supply has 10 lines, connected to the power calculator and the control panel. Connect the power line interfaces and check if the plugs are not deep enough. Once all the wires are connected, the power will be connected. The lights of the mine will be activated and the machine will be activated.
11、设置IP
11. Setup IP
12、打开刚才下载的IPReporter软件，点击“开始”，然后按住矿机的IPReporter按钮，一秒后松开。这时软件上会自动弹出这台矿机的IP地址，并将IP地址复制到浏览器中。单击回车键。在弹出的身份验证中，输入“root”作为用户名和密码，然后单击确定。
12 Opens the IPReporter software that has just been downloaded, clicks on " Starts ", then presses the machine's IPReporter button and releases it in a second. This automatically ejects the IP address of the miner and copys the IP address to the browser. Click the return key. Enter " root " as the username and password in the ejection authentication, and then click for confirmation.
13、复制我的池地址
13, copy my pool address.
14、这时候我们就进入管理矿机的后台了。这里在miner配置中，复制蚂蚁矿池的挖矿服务地址，复制以下内容//即可。一共三个地址，都要拷贝到矿机后台。这一步是为了保证你挖的钱都到你自己的账户上。
At this point, we're going to go to the backstage of the machine. Here, in the Miner configuration, we're going to copy the address of the mining service in the ant pond, copying the following. All three addresses are going to be copied to the backstage of the mine. This step is to make sure that all the money you dig is on your own account.
15、在工人一栏，只需填写你的蚂蚁矿池中新创建的矿工的名字。三个都填同一个名字，就可以自己设置密码了。点击右下角的保存应用；并等待安装完成。
In the worker's column, just fill out the name of the newly created miner in your ant pond. All three have the same name, so you can set your own password. Click on the preservation application at the lower right corner; and wait for installation to be completed.
16、监控计算能力
16. Monitoring computing capability
17、进入Miner Statu(矿机状态)，刷新几次，就可以看到蚂蚁矿机当前的运行情况。然后打开自己的矿池，你就能看到矿机给你挖了多少个硬币。
17, enter Miner Statu, refresh several times, see how the ant mine is currently operating. Then open up your own pond, and you see how many coins the mine has dug for you.
注册有任何问题请添加 微信：MVIP619 拉你进入群
打开微信扫一扫
添加客服
进入交流群
发表评论